Chuck Maddox’s Watch Blog

This page is a journal of my journey in the field of Horology, which is timekeeping. In other words, watch collecting. Which in my case is the collecting of chronograph watches. To contact me, email me at: cmaddox3@sbcglobal.net .

Name:
Location: Chicagoland, United States

The Extremely wordy version of my Resumé is located here: http://home.xnet.com/~cmaddox/resume.html

Thursday, May 08, 2008

From my email In Box, an interesting Omega case...

I received the following email yesterday:

Hi Chuck:

I am a very fan of all your information about OMEGAS, for me your site is like a Bible, and is for that reason that I am sending to you this pics of an OMEGA case that is fot me unknown, please help me to find out the model, if it is an speedmaster or a seamaster,and what movement should be inside this case,

Thanks a lot, your friend from Mexico

Hector

Hector,

Pleased to meet you. Thank you for your kind words... I have never seen a case like this from Omega in the past... In looking at the inside caseback under high magnification through the crystal,

it provides a clue to what the case may be. Since the Caseback says 145.014 and we know that the 145.014 is the Mark II Professional case, I surmise that this case is a Mark II Pro case which has been "Re-sculpted" to give it the external appearance of a moonwatch. The effort is not entirely dissimilar to the Re-sculpted cases that Gilliam in Germany crafts out of 176.012 cases:

I suspect someone has done similar work on the case you've come across...

I hope this is helpful to you...

Chuck

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Hi, Chuck,

thank you very much for the information,

this case was actually offered as a mark II case but since it was offered as a spare part and being so different to the regular mark II cases I thought that may be the case , the crystal and the case back were separate parts put together, and may be the case belong to some vintage seamaster, but looking different pics of some seamasters I did not found this profile of ccase,

so thanks a lot for the information and is for me a pleasure that you post this storyon your site,

thanks again, and Best Regards

Hector

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

A very interesting item and would make for a very interesting watch. I've often said that while the Mark II looks much more modern and seemingly is more rugged due to it's armor like case when compared to the moonwatch, this case's appearance doesn't often look good on a strap. This case style nearly cries out to be on a bracelet. With this case we see a method to have a "cross-bred" version of a Mark II that might look a little more handsome on a leather strap.

Enjoy!

-- Chuck

Monday, February 04, 2008

Sad news to report, the loss of an innovator...

Sad news to report on the loss of an innovator...

I received a query in my email early this morning asking about dealers for Ventura watches. I immediately went to Ventura's watch site and found it was no longer active. So I sent an email to recent Ventura V-Matic Loga purchaser David Alstott to see if he had heard of anything.

[David's Stainless Steel Ventura V-Matic Loga proudly on his wrist,
photo used without permission, but I'm sure he won't mind...]

Sadly what he reported back to me, while not a complete surprise was saddening and very disappointing to me:

Dear Friends,

today, on the 12th of November, the receiver of the bankrupt Ventura Design on Time conducted an auction to sell the entire assets including the brand and the stock.

While I tried hard to get back the control, I stood no chance against the highest bidder, the US corporation Swiss Watch International SWI, who as of now is the new owner.

I am sure that this is good news to those seeking a bargain.

For me as the founder of Ventura, this is the moment to say goodbye to you; thank you for your loyal support over all these many years. You will understand that I will now first take some distance from the events of today.

There are yet many ideas, innovations and designs that are ready to stun the watch community and I have been encouraged to create a new and even bolder corporation; let me think about this for a while. I will publish on this site a new URL with a different name soon, on which I will keep you posted regarding my plans.

For now, I remain truly yours,

Pierre Nobs

Founder of Ventura

Note: Both the above passage and the passage below seem to be at the very least a couple of weeks to several months old. Perhaps this is not "news" in the freshest sense, but it was certainly news to me and something I had not seen in my travels.

David also sent me this link to a thread on PuristPro which I will excerpt here:

Concerns about mechanical driven capacitor watches. Seiko, Citizen, Ventura. Jan 19, 2008,16:43 PM

By: bernard cheong 

[NOTE: This appears to be a quoted article, but no source is quoted -- Chuck]

Ventura, the only company that made high quality Swiss type digitals went bust last year, it was sad...here is a short report of note.

High-quality digital clocks bring Volketswiler Ventura into the bankruptcy

Ventura Watch was known for Design-oriented watches and focused since two years fully on high-quality digital watches. Now Ventura deposited the balance.

Since 1990 stood the Volketswil Ventura Design on time for wrist-watches, with which the time indicator was reduced to the substantial. Shortly after the company was founded, the digital clock "Watch" of the designer Flemming Bo Hansen became with 50'000 copies a huge success: A rectangular flat steel housing that encloses a digital display of only four large numbers. It made it quickly into the permanent collection of the museum of modern art in New York. Later Ventura made sensation with mechanical clocks, sketched by the Zurich architect and designer Hannes Wettstein.

Two years ago Ventura founder Pierre A. Nobs wanted to secure their unmistakableness with a courageous decision of the brand. Instead of continuing to compete in hard contest price segment from 1000 to 5000 CHF for mechanical clocks against countless competitors, Nobs decided to go for a niche: Ventura should become the brand for technically innovative, Swiss-made digital watches with high Design quality.

Success took time

But Nobs needed funds. In 2005 A group of investors took over of the firm founder the majority, the share capital by 500'000 to 900'000 CHF was supplemented. But success with the new positioning at the market took time: Was the turnover in 2004 still 5.5 million CHF, it sagged 2006 to approximately 2 million, and in the current year was "the course of business" even worse, as Pierre A. Nobs in a report writes the media.

On Thursday Ventura announced bankruptcy.

Nobs explained, the promised investments weren't made, and accuses the new owner to have pulled the plug too fast: The shareholders which were active in the private Equity and Hedge fund business would have "obviously their own conception concerning the long-termness". Reto Suter, director of Horizon21 private Equity in Pffaefikon SZ and board of directors president of Ventura denies this: "we did not see the perspectives ultra-short-term and also not medium-term". But expenditure and yield could not have been brought to the equilibrium.

By the bankruptcy of Ventura eight persons are concerned in Volketswil and four in the German branch in Nuremburg (babelfish: peppering castle). Pierre A. Nobs raises steep reproaches: In the surrounding field of the bankruptcy "board of directors president and shareholders have served themselves still extensively with valuable clocks from the stock", while the coworkers had to wait for their wages. Ventura executive board president Reto Suter did not want to express himself to these reproaches.

Industry foreigner at power

Company founder Pierre Nobs looked for financial sources in the consequence and found it in the surrounding field of Hedge fund managers, who showed up enthusiastically by the idea and assured an appropriate funds support. On five years the laid out Business plan for the restructuring planned that in the first two years still on red numbers had to be counted, the "BREAK Even" was intended for the third year. In accordance with Pierre Nobs his Ventura was actually fully in the context of this plan, despite compared with the previous years reduced turnover. The investors had however obviously different conceptions of "long-term commitment", displaced Nobs of all positions without further ado and used a new "Interim CEO". Shortly after, "the plug was pulled", although, according to Nobs, there were appropriate open accounts payable in a framework, which would not have required the drastic measure of the balance depositing yet.

The pipeline would be full…

Nobs gives himself optimistically and does not want give up his life's work - he is intensive on the lookuot for new partners with whose assistance he can secure himself the bankrupt's estate, in order to make a new beginning. "I will however certainly mess araound any more with ` Financiers ', but only with persons, who have a a genuine, respectable background in the clock industry, and whose horizon goes futher than the next quarter result. Our pipeline is full - many novelties would be ready, several components are already produced ?und could be supplied by the suppliers within short period. Also drafts exist of Paolo Fancelli for a long expected successor of the legendary "Watch" - a simple digital clock in a price segment of 600-700CHF, progressed very far, for which trade and final customers actually wait already longer. This potential best seller was also a component of our five year plan for the Turnaround of Ventura. I hope naturally much that this clock can be nevertheless still realized soon."

Service and repairs:
unclearly

The question is not yet clarified, how it will go on with service and repairs for existing Ventura clocks - according to Nobs statements, he is currently working on a solution. Spare parts would be present in principle, are however for the time being still blocked in the bankrupt's estate. Until one knows details will depend thus also on how rapidly the bankruptcy proceedings are completed. We will inform you naturally here, as soon as we know more.

The fellow who contacted me initially replyed to me [after I forwarded David's response] that Princton Watches, an authorized dealer of Ventura, currently has closeout deals on it's remaining stock of Ventura's. People who are interested can visit their site, although considering the fact that most of the mechanical Ventura's had a "snapback" caseback which was pressed on with a force of at least a ton, service is up in the air for these watches currenty.

I've long said that of all the watch firms in operation that Ventura and Ventura along had a product line that I at least liked every model it produced. Some models I was much more enthusiastic about than others, but until they started "Icing" some models and producing some gold cased white dialed watches, they stayed true to their coredesign roots and produced elegant Bauhaus styled watches.

While other firms routinely issued Valjoux 7750 based chronographs with 25 Jewels, Ventura's models sported 38 Jewels. All of their mechanicals were elegantly finished and on display via a sapphire back and all had a minimum W/R of 100m dispite the snap on displayback. Their watches were typically available in both Stainless Steel and Titanium, and their Titanium models were nitrogen hardened to the extent that their hardness were only rivaled in hardness by IWC's Titanium process.

If they made a mistake it was trying to compete in the savagely contested $1000-$6000 price range where the bulk of Swiss watch manufacturers compete. It's tough for a small firm of recent vintage to compete with the Omega's, TAG-Heuer's, Breitling's and similar brands with long established reputations and consumer awareness.

I had hoped that a firm operating from a fresh sheet with refined and focused product line could survive the competition. Ventura's ceasing production of mechanical watches several years ago to re-focus it's energies on the high end quartz powered niche. Unfortunately, it would seem that this effort to remain solvent wasn't successful and this move could be seen by history as the beginning of the end.

I for one am very saddened by Ventura's demise. I own a pair of V-Matics, the V-Matic Master [pictured immediately above] and a V-Matic Loga both in Titanium both on bracelet. I only hope that other firms will look to create models which capture some of the style and elegant beauty of these fine fine timepieces.

I am a big fan of Bauhaus design, these watches, which epitomize Bauhaus so well will likely age very gracefully, their modernistic lines and styling cues seeming just as fresh 50 and 100 years from now as they did the day they rolled off the production line.

-- Chuck

Monday, January 07, 2008

4th possibility for David Scotts Moonwalking Waltham...

One of the things that has been of interest to watch collects, particularly those who also share an interest in Space exploration is the question of which Waltham Chronograph Astronaut David Scott wore on the Moon during EVA-3 of the Apollo 15 mission.

In the past, I've purchased a pair of Waltham chronographs, which seem to fit the general description of a watch which "I used my backup Waltham watch (which was) of a similar type [to the Omega Speedmaster Professional Chronograph]":

and D. Lee Brandt purchased and sent me pictures of another possible candidate for Mr. Scott's Chronograph:

Olaf Oldigs from Germany contacted me with news that he had purchased another Waltham chronograph which he felt might be another Candidate but asked me to refrain from posting pictures until he had the time to have the watch serviced and detailed. Over the weekend he send me the following photographs [click through for enlargements]:

Personally, I think this is the most handsome candidate I've seen so far. Looks a little more rugged than my "Carrera"Styled example [second from the top] above, but not as bulky as the top most example of mine.

Thanks to Olaf for his interest and permission to post his pictures.

Anyone else have an interesting candidate to nominate? I'd love to see them!

-- Chuck

Thursday, November 29, 2007

Ocean7 to bring Ploplof Homage to market in February...

Ocean7 to bring Ploplof Homageto market in February...

Did you miss out on getting a PloPlof for your collection because of the Omegamania price bump? Dispair that you'll never be able to afford such a watch? Well there may be an alternative...

I just had a long phone conversation with David Greenspan [who many old time TimeZone Omega Forum regulars will remember ] and he pointed out to me the Ocean7 watch company's website:

In addition to a number of very interesting current offerings, it appears they will be producing a Homage to the Omega Ploplof in February:

This is a good news/bad news situation... It's good news to those who'd genuinely be interested in owning a PloProf Homage watch, it's bad news to collectors as it's likely that the unscrupulous may well use this watch as the basis for a reasonably convincing fake.

Details as well as an interesting line of other watches on the Ocean7 Watches website.

-- Chuck

Tuesday, July 31, 2007

LeJour: The Precise World of Chronographs Manual...

 I recently purchased a LeJour:The Precise World of Chronographs Manual off of eBay. I just finished scanning the manual and posted it within an HTML framework for everyone's viewing convenience.

Enjoy!

-- Chuck

Wednesday, July 11, 2007

Watch Blog Section added to my Links page...

A request for a link exchange from Jason of Swiss Watch Boutique has prompted me to add a section on my Links page for Watch Blogs that I know of:

Watch Blogs
Chuck Maddox Blog
Dream Watches Blog
Fratellowatches Blog
OmegaBlogger
Swiss Watch Boutique
Swiss Watch News
Facts Figures Statistics
Velociphile's Journey
Watch Report.Com Blog
Watch Report.Net Blog
Wrist Watch Review

If you know of a watch blog that I don't have a link for post a comment or email me and I'll add it [unless it's a fake or replica site or a mere sales site. Must include interesting content].

NOTE: I will not publish any comment referring folks to "Replica" or "Fake" watch sites selling knock-off's of trademarked watches. I have no problem with OK-ing comments to legitimate watch blogs, watch manufacturer sites, sites which offer "Homage" watches [Homage is a watch [typically a discontinued model] done in the style of another brand but branded as a Homage/Tribute piece made by the company producing/selling the watch]. But I will not publish comments where people post URL's to Rolex Replica . org or anything similar. Save your and my time or waste your time, it only takes me 5 seconds to reject comments.

Thanks!

-- Chuck

Labels:

Friday, July 06, 2007

A emailer asks “Where's a good source for NATO straps?”

An emailer asks: “Chuck, Where's a good place to buy NATO Straps?”

It occured to me that while I had some ideas for sources, I don't know that anyone has compiled a list of said sources. So I decided to share my response and post it in the blog with the idea that It would be a pointable place were we could list such staps, and if anyone reading this blog entry had their own suggestions, they are encouraged to post a comment with links.

Sound reasonable?

Ok, here were my suggestions:

The fellow I usually use is Ron Sabo/International Watchman:

http://www.internationalwatchman.com/home.html <---  Look under Watch Bands then Military

Here are some of Ron's more interesting Militaries:

The only rub against Ron (who's prices can't be beat) is that he has a $45-50 minimum order.  So so if you're a little short on your order, buy a $15 assortment of:

Spring bars... Sooner or later you know you'll shoot one across the room, might as well be prepared!

Another source that has been highle recommended to me is West Coast Time/Howard Marx. Who in addition to NATO's also offers British Regimental Color, Rhino and Zulu straps:

Lastly, but not least, there is always Military Watch Resource or MWR, who offer a wide variety of straps as well...

Well, those were my suggestions, do you have any to share? If so, please post a comment!

Thanks!

-- Chuck

Thursday, June 14, 2007

Two significant adds to c.1983 Heuer card page...

Good Morning [Afternoon, Evening...]

This morning I received four scans from Greg Wade of c.1983 Heuer data cards to add to the page I have already posted on-line.

Each card is notable and significant...

The first card provides us with the first printed information on the exceedingly uncommon and rarely seen Gold 510.508 Lemania 5100 chronograph:

Not many Lemania 5100's were ever put in a gold case!

The second card provides us with perhaps the best explanation of the rationale behind Regatta watches:

It all seems much clearer and easier to understand now!

Thanks are due to Greg for his contribution to the knowledgebase existent on the Internet.

Cheers!

-- Chuck

Tuesday, May 15, 2007

Watch Timer highly recommended by Shane Ede...

A watch timer highly recommended by one of my watchmakers...

I got a phone call out of the blue from one of my watchmakers today [Shane Ede from Toronto], and he had me navigate to this web page and was telling me that this unit (costing less than $900 USD) is better than the: Witschi Watch Expert II (which runs around $2,775 USD) and may even have more features than the Chronoscope M1 (runs around $10,000), and the Vibragraph Watchmatic II (also $2,775). He has the Witschi and bought Mumford unit when his Vibragraph died and he'd rather depend upon the Mumford unit than any other he hass seen.

There are lots of reasons, much of it far too technical for this blog. This unit has many many more features not the least of which is how little it impacts your wallet compared to the competition. "And furthermore, Mr. Bryan Mumford will work as closely as required with any customer, his customer service is second to none!" <-- Direct from Shane.

Sounds real good to me. Shane asked me to pass it along for those who sometimes tinker with their own collections.

Cheers!

-- Chuck

[Added 5 May 2008] Just got off the phone with Shane and he informs me that this unit WILL time the latest model Co-Axial movement with the unusual 25,200 BPH rate and it will measure the Co-Axial amplitude as well... He had a latest model Co-Ax in recently and the timer worked like a charm. -- C

Monday, April 30, 2007

Breitling Navitimer Instructions posted:

Bill Sohne purchased a vintage Breitling AOPA Navitimer 806 recently, and fortunately for all of us, it came with an instruction manual for how to use the slide rule. Bill was kind enough to scan in the manual and email them to me for presentation and the utility of "Whiz Wheel" fans everywhere:

[click on graphic above to open instruction page in new window.]

Thanks Bill for making this possible for the Internet watch collecting community!

-- Chuck

Labels:

Monday, April 23, 2007

Omega Chronograph Dimensions page updated...

Section added to "Omega Chronograph Dimensions" Tables/page...

At the behest of Steve Waddington, moderator at Chronocentric's ZOWIE Omega Discussion Forum and all around good guy, I've added a new section on my “Dimensions of Selected Omega Chronographs...” page...

Steve mentioned to me that he often used that page as a quick look-up when people were asking about a 145.xxx or a 176.xxx and it'd be really handy to add a reference to the 176.001 card and discussion we had in C/ZOWIE last week.

A "scrunched" version of this table looks something like this:

Known/Documented Omega Prototypes [NOTE: These were...]
Ref.#:
Circa Year:
Calibre:
Description:
Notes:
145.0022
c.1968-1973
c.861

Alaska Project/211

Mercury Hands @ Eric So, Lot 211

176.001
1974
c.1040

c.1040 Prototype

Thread, Archive, Data Card

176.0017
1974
c.1045

c.1045 Prototype

Unreleased model

11 103
c.1978-1986?
¿l.5012?

"FIFA Referee"

eBay Archive: 1 2 2a 3 Lot 276

Note: Alaska project is assumed to have the same dimensions as a 145.022 save for ... .


I'll be contacting the fellow who purchased a FIFA Referee Chronograph last month and asking him for dimensions of his 11 103 FIFA and updating this table as other prototypes become documented.

Cheers and Enjoy!

-- Chuck

Sunday, January 14, 2007

Considering a Speedy Day-Date? Read this 1st...

 Considering a Speedmaster Day-Date model, Read this before you commit!

Levy03 in the TZ Omega Forum pointed out that there have been a trio of reports of Speedmaster Day-Date (Also known as Day-Date Month) models which have reportedly had the problem within warranty of failing to change the day of the week. In the first instance a purchaser of a 3523.30 had two examples fail from the same Authorized Dealer and was waiting on his third.

In the second instance a purchaser had to return his example (pictured above) to his dealer when the day wheel reportedly wasn't working properly.

It's hard to impossible to say if this is a fluke, a bad batch or a something more. However, it seems advisable to check any Day-Date-Month 7751 based chronograph for proper Day and Month changeover before you purchase it.

Here's what to do:

  • Advance the time on the watch to approximately 6:00 pm
  • Set the date to 31, the day and the month can be at any day or month.
  • Then advance the time past 12pm and see if the day and month advance.

If both the day and month switch over smoothly between about 10pm and 2-3am then the watch is probably ok. If it doesn't... I would pick out another.

Thanks Levy for pointing this out.

-- Chuck

Wednesday, December 13, 2006

Hard to pick a title for this entry...

I am really at a loss for a title for this entry... When so many good titles come easily to mind...

  • Crow must be a delicacy in Australia...
  • We've known he was an idiot, now he proves he's been lying...
  • As Queen sang "Anyway the wind blows... [GONG]"...
  • Has the lying stopped or not?
  • It takes 6 failures to make Georges a wise man?
    • [Tongue in cheek G, tongue in cheek!]
  • When the shocking is not a surprise, at all...
  • Somehow I'm not expecting an apology anytime soon...
  • Aren't you glad all c.33xx owners are so forthcoming, eventually...
  • Yet I get roasted when I share all what I've seen...
  • And the Band played "Nearer, My God, To Thee"

All of which would be such perfectly suited titles it's hard to pick one! Why?

Y'all remember Thomas? (Sebastian Melmouth, etc.)? He posted again on WUS:

[my comments will be interspersed and indented...]

1 Hour Ago

Thomas Member

Join Date: Apr 2006 Posts: 13

My NEW watch-Warning, prepare to be shocked!!!

George Zaslavsky is a wise man and the wisdom he has continued to share with us is the fact that a movement MUST FIRST BE RIGOROUSLY TESTED TO ENSURE RELIAILITY. His concerns that Omega is suspect in this area is absolutely correct.

Observation: Georges is far from the only person who is concerned about Omega and it's use of F. Piguet movements.

I can confirm to you all that there is next to nothing quality control at Omega and the most MINIMUM testing is done on their watches.

I am supposed to be shocked about this?

Now this might be o.k. on generally simple and reliable movements like the 2500, BUT, on the much more complex movements like 3303, 3313 and 3612 this policy has proven absolutely disastrous.

I guess it takes a long time from the echo to come back from OZ.

The fact is that I have concealed that my rattrapantes

This has to make all the people looking at c.33xx's and asking for owner's experiences feel real secure...

(note the plural!! but more on that later)

Ditto previous comment.

have all suffered either complete failure on my wrist or have had massive faults and countless minor faults eg warping on the dial, rotation of the seconds hand jumpy, jittery and wobbly).

This is really interesting coming from someone who was waxing grandiose last week:

One little fetish of mine concerns the alignment of the hands. They should be PERFECT, and they certainly are here. The 12hr totalizer hand and the central chrono hands (plural!) form a straight line.

My broadarrow would not reset properly

This is supposed to shock me?

and most my wife's first diamond deville had chipped and missing diamonds from the bezel (yes you read that right).

Kinda makes you wonder why he bought it in the first place.

You would never see this happen to a Rolex watch.

Paging Matthew J!

Since I saw myself as a champion of the new Omega,

... a brown-noser, extraordinare!

I've been too ashamed and in a state of denial to hitherto disclose these all too painful facts.

Fool me once, shame on you. Fool me six times, what an maroon am I?

The simple fact regarding my rattrapantes is this; since march of this year I've owned THREE rattrapantes and TWO FAILED ON MY WRIST AND THE THIRD ONE WOULD NOT WORK WHEN THE DATE FUNCTION WAS ENGAGED.

Is this the point I'm supposed to be shocked about?

This also explains why I carried on so much in my recent posts

¿He only carried on in his recent posts?

because that was my third new watch and I was fully convinced all was finally o.k.

... Some one who really profoundly believes ‘Past performance does not mean future gains’ ...

How wrong I was!!!!

Wasn't the first time, by a long shot. Won't be the last time, either.

the third one lasted three weeks.

Makes me really eager to hand over my credit card, oh boy!

It really requires a seperate post to describe the superhuman effort I made to obtain THREE new rattrapantes and then to get full in store credit to swap the rattrapante for some other brand.

Especially when you know so much more than the people who you know more than about these things who are telling you this.

It's really an unbelievable story.

Only unbelieveable to those who are blind or aren't paying attention.

For now, I would urge you all to stay away from the utterly crap and unreliable Piguet made movements. Run as far as you can from them and I would not touch one with a barge pole.

Gee, like this is news.

Omega is producing substandard watches at too fast a rate to meet demand and only worries about any problems at the warranty level.

But all of those engineers... all that marketing... all those watch executives... who know what they are doing better than any of us!

There is the most minimum testing done.

Somehow, I don't think this is the part that's supposed to shock either.

Anyway, I finally have seen the light

Somehow I doubt that. Ironically, last week it was...

"I think I now understand Martin Luther King's great speech, 'I've been to the mountain and I've seen the promised land'. "

The truth be told is that Bienne is not on a mountain top it's in a valley and what's going on stinks to high-heaven.

and have now given away my garbage broadarrow (yes you read that right)

[shrug] Yawn...

and have managed to get a refund for my utterly forgettable rattrapante.

Ironically, last week it was...

I never want to wear anything else.

George Zaslavsky is completely correct when he says that the Rolex Daytona is the best chronograph on the market with the incredible bona fide in house 4130 movement that is fantastically well made, beyond anything Omega can ever manage.

I don't doubt that the current Rolex Daytona's along with the previous El-Primero and Valjoux 72 base movements are excellent chronographs.

I do however maintain that I am unconvinced of any practical advantage in-house movements impart other than lack of independent service or parts availability. I'm also unconvinced that the Daytona is the best chronograph in the market. I don't believe it is the best all around chronograph on the market.

Omega will always be a second rate watch in comparison to any Rolex

At the very least debateable and I certainly do not agree.

and I should know better than most of you.

Laughable!

However, if knowledge/experience is directly related to amount of stupidity exhibited he may have a case.

I'm just happy that I got out of this in time with my money refunded in full.

I hope all the people who've read the comments about c.33xx's and taken the plunge anyway will be so lucky.

I now own a brilliant watch, that is with good reason the most coveted watch in the world and one of the 10 best watches ever made. Enough of this and onto my new watch.

[pictures of two-tone dark dial Rolex Daytona]

Let me now present to you a genuine superlative in house watch, the Rolex Daytona Cosmograph. If you are all a little green with envy that will make me feel all the better!!

Gee, I wonder what motivates him?

My new watch is the very definition of beauty, craftmanship and reliability. Most of these qualities are not to be found in omega watches and certainly was no to be found in my 3 faulty rattrapantes.

You mean the Rattrapantes that last week:

Its graceful lines, curves and accents really give it an air of class.” and

Of course, both hands enjoy the benefit of column wheel mechanisms. In other words, there is no slippage in the engagment of the mechanism and the pusher action is clean, crisp and firm. It really is a delight to use!!! This is the true haute horology of the chronograph complication. I thank Omega for this gorgeous creation,

or the Rattrapantes that two weeks ago:

Firstly, its a stunning watch in every way, with incredibly good looks. There are no weak points about this watch whatsoever.”, ... “this is, I think, the most innovative, refreshing and novel looking watch on mother earth. There is nothing like it. This watch is a complete success with respect to design because Omega didn't shackle itself with tradition, but also, it didn't try to re-invent the wheel either. The dial is just beautiful and perfect. I'm happy to say that the craftsmanship is equal to the challenge.” ... “Omega's design is a text book example of the art of watch design. If that wasn't enough, Omega then went ahead and designed what is the most clever and charming seconds subdial ever!! It truly is inspired. I never get tired of admiring it.

There is no pretend in house movement like the ones omega farmed out,

One Week ago: Omega rattrapante-Nothing else matters.

Two Weeks ago: “Getting to the heart of the matter, the greatest aspect of this beauty is its magneficent double column wheel movement. It is the stuff of horological dreams because it is complicated, beautiful and very rare. Only the very special chronographs have this.

Very special chrongraphs that break, a lot.

with such disasterous results, to piguet.

B--b-but I thought: “Life with this watch is a pleasure. I take pride in it and when needed, I flash it in front of an obnoxious rolex wearer and cut them down to size. People stare at it alot and I'm always asked how expensive is it. When I tell them, lots say why didn't I get rolex instead. I always reply that I wanted some more special!

This is all genuine and bona fide in house and consequently the quality speaks for itself. Oh ye baby this is the real deal.

This week anyway.

Rolex has put more careful and detailed work in the hour markers and the clasp pictured below than you'll find in any omega watch.

So the clasp was really bad on the Rattrapante too, eh?

I should know since..... my rattrapantes had distorted and warped dials,

This guy really has no sense of direction does he?

jumpy and jittery movement of the seconds hand,

Folks, this is the same fellow who last week said:

Of course, both hands enjoy the benefit of column wheel mechanisms. In other words, there is no slippage in the engagment of the mechanism and the pusher action is clean, crisp and firm. It really is a delight to use!!! This is the true haute horology of the chronograph complication. I thank Omega for this gorgeous creation,

I'm not making this $#¡+ up!

in fact omega coundn't even place the leather strap correctly on the watch.

Oh, but that's so hard!

The movements are complete garbage aswell and I now take back whatever I said against the valjoux 7750 movement.

Here is a reminder of what the same person said two weeks ago about the 7750:

As the recent WatchTime article showed, most rattrapantes have a modified 7750 movement, which is truly an ugly, indeed disgusting movement, not worth mentioning on the same day as the 3612.

At least it works!!!

That seems to be unimportant to certain people.

Here's a quote from your final paragraph two weeks ago:

Life with this watch is a pleasure. I take pride in it and when needed, I flash it in front of an obnoxious rolex wearer and cut them down to size.

Two weeks ago you were flashing your Rattrapante at obnoxious Rolex wearer's... Now you are the obnoxious Rolex wearer!

I honestly don't know who's the biggest loser, the Rolex forum(s) or you!

I'm sure it may seem cruel to pick on the obviously challenged. And personally, I'd warn everyone to take anything_ said by this person with an appropriately sized grain of salt:

[Disclaimer: recommended doseage with this person may exceed safe consumption limits]

Perhaps this latest post is a lie to try to provoke a flurry of other posts, this individual claims to have bought a Rattrapante and when queried about the veracity of that claim provided pictures and hasn't been shy about posting new pictures from time to time.

Either this person has been intentionally misleading and lying to people about this watch and this movement family for many many months, OR maybe this post is the knowingly lie.

Who knows, or at this point really cares? Either way, he's lying and intentionally misleading people.

It would not be fair to lump in this sort of behaviour with those of other c.33xx owners who have either a) been forthcoming about problems they have suffered, or b) those who have earnestly and honestly have not suffered a failure with one (or more) with these chronographs. Even when a number of owners emphasize the good points of their experience (usually the accuracy of the timekeeping on their examples) and ignore or downplay the problems with this movement.

I've said it before and I'll say it again.

Do what you want to do, listen to whomever you wish to.

But is my opinion buying one of these watches is akin to buying the sister ship of the Titanic and running it at flank speed in the North Atlantic during Iceburg season. It is simply not a sensible risk, certainly not a MSRP or likely dealer discounted prices.

I seriously thought about posting a poll about what to title this entry over at the TimeZone Omega forum. But that would probably be too provocative and over the top and I don't want to create grief for Damon...

It really REALLY p¡$$es me off that the problems are going on with these F.Piguet movements, people are intentionally lying and misleading innocent people about these problems and I really think someone needs to pull Omega/Swatch/Hayek's head's out of their neither-regions about the whole situation.

It's truely shameful to drag such a venerable, respected and elder firm like Omega down into the sewer with this sort of foolishness, but it doesn't seem to faze the powers that be.

[sigh]

-- Chuck

Tuesday, November 07, 2006

Eberhardt & Co. also goofs on their bezel's like Tissot!

One of the things that's always pleasant about having a blog is hearing from people all over the world. A couple of days ago, I heard from Armando Camacho out of Guadalajara, Mexico in response to my recent blog post on the Tissot NASCAR Chronograph:

Chuck:

Have you noticed that Eberhard's Tazio Nuvolari chronograph has suffered the same malady for years (an absurd tachymeter scale with its numbers translated into MPH)?

Indeed I hadn'tand Eberhardt & Co.'s website has to be the singularly most difficult website I have ever tried to access. So when I replied to Armando, I also CCed Pascal Stratsma as Pascal has a couple of Eberhardt chronographs. Their replies were a near dead heat with pictures of two separate Eberhardt models which have the same screwy needless tachymetre conversion as the Tissot I had posted earlier. Here's Armando's provided photo first:

and this is the clearer of the two... The nice thing about this goof, is that at least one has the correct Tachy bezel underneath the crystal on the dial.

However the exact same thing is happening on this model that Pascal submitted to me:

What can I say... stupidity isn't limited to Tissot it'd seem!

Thanks to both Armando and Pascal for their contributions to this entry. I couldn't have done it without you!

-- Chuck